The complex admixture plastifyingly-airentrainmently about the activity retardatory

The Technical approval IBDiM No. AT/2002-04-0279
The Hygienic certificate PZH No. 407/B-294/92
PN-EN 934-2 the Admixture to the concrete, mortar and the leaven. Definitions and requirements 

BETOSTAT is a complex plasticiser plastifyingly-airentrainmently about the activity retardatory. Especially recommended is to the production of concretes of goods, transported on further distances, and especially intended to the exercise of bridge constructions and road surfaces. Perfectly it is fitted for concretes of goods usual, waterproof and frost-proof. Is priced favourably within the range protections of the steel-armament. 

Basic activities of the admixture on the concrete (or mortar) are following:

  • well it plastifies the concrete-mixture , makes possible the reduction of the water needs for make a mixture approx. 10 %
  • retards the bond without the change of the consistency
  • profitably airentrainments the concrete-mixture , improving her gettability, mixture flow, etc.
  • retards the growth of the endurance in the warming-up period and considerably increases the endurance final, especially in elongated time-limits
  • the waterproofness improves, frost-proof and absorbability of the concrete

BETOSTAT makes easy the production, the transport and the arrangement of all usual structural concretes and special, in this of goods transported on considerable distances, at the elongated time of the processing, especially in the summer-period. Besides:

  • makes possible the delay of the bond to several hours
  • recommended is everywhere there, where exists the necessity of the elongated time of the processing, even
  • at high temperatures of the environment and the concrete-mixture
  • especially recommended to concreting of bridge constructions and road surfaces
  • makes possible disboarding already the morrow
  • in the period of lowered temperatures, on account the elongated bond disboarding becomes late, however after the end of the bond follows the dynamic increase of the endurance
  • recommended to cement-mortars and to products vibro prees moulding

BETOSTAT complies in quantities from 0,3 to 0,5 % masses of the cement, the optimum-dosage should be to fix severally, depending on the destination (on the average 0,4 %). Overdosage to 0,6 % lengthens the delay of the bond and enlarges airentrainment- it does not diminish the endurance. In the dosage above 0,7 % can be lowered by the endurance, increasing simultaneously frost-proof. Well it cooperates with all kinds of cements, and in case of the addition of ashes to the concrete. 
Especially beneficial effects in the building of road-bridge obtains at the joint dosage: BETOSTAT 0,5% + SKORBET 1-1,5% (high frost-proof and the waterproofness, and low absorbability of the concrete, indispensable for the exploitive persistence of objects).


The material resources the water salt solution of aliphatic amines and detergents
The form of the admixture liquid
The colour bright
The density 1,16 +/- 0,02
Power hydrogen 10,5
The delivery the stockpiling
The storage
the protection before the insolation, the persistence - year cans from the material 20litres, the cask 200 litres, palette-containers after 1000 litres, the delivery margin with tank trucks.
Work safety regulations The article can cause the irritation of mucous membranes, skins and eyes, In case of wetting eg. hands or faces to wash off warm the water with the soap. In case of the consumption to cause vomiting to give to the victim potable the glass of the water or the milk to get the medical consultation , In case of the dirt of eyes to rinse with cold water holding gaping eyelids at least 15 minutes to get the medical consultation , One courts to use the clothing, gloves and goggles, It recommends to protect before the access of children

All stages of the manufacturing process BETOSTAT subjected are the qualitative tight control byown technological services of the Producer.

The information included in the present Card of the Product have a general character. Recommendations regarding applies our admixtures and awaited effects are result of many research and implementation and the experience of long standing practical. However, these advices have not the binding legal force and becauseof that it doesnot exempt our receivers from the independent settlement of optimum-quantities of admixtures (with the regard of the real quality of possessed materials, their usefulnesses and correct cooperations), in the adaptation to foreseen uses.

Telephone orders and of fax to The Sales Department of the Enterprise Innovatively -- Implementively „LUBANTA” S.A. in Luboń nearby Poznań: 0-61/813-08-37.

The enterprise Innovative-implementive“LUBANTA” S.A.
62-030 Luboń, Armii Poznań 49 Street
E-mail:  Ten adres pocztowy jest chroniony przed spamowaniem. Aby go zobaczyć, konieczne jest włączenie obsługi.

Copyright © 2020 Lubanta Sp. z o.o.

wykonanie -